Threaded Mode | Linear Mode

Ayodele · (This post was last modified: 09-27-2021 07:35 PM by Ayodele.)

*2767*688# = Unlocking Code
*#8999*8378# = All in one Code
*#4777*8665# = GPSR Tool
*#8999*523# = LCD Brightness
*#8999*3825523# = External
Display
*#8999*377# = Errors
#*5737425# = JAVA Something{I
choose 2 and it chrashed}
*#2255# = Call List
#*536961# = Java Status Code
#*536962# = Java Status Code
#*536963# = Java Status Code
#*53696# = Java Status Code
#*1200# = AFC DAC Val
#*1300# = IMEI
#*1400# = IMSI
#*2562# = ??? White for 15 secs
than restarts.
#*2565# = Check Blocking
#*3353# = Check Code
#*3837# = ??? White for 15 secs
than restarts.
#*3849# = ??? White for 15 secs
than restarts.
#*3851# = ??? White for 15 secs
than restarts.
#*3876# = ??? White for 15 secs
than restarts.
#*7222# = Operation Typ (Class
C GSM)
#*7224# = I Got !! ERROR !!
#*7252# = Oparation Typ (Class
B GPRS)
#*7271# = Multi Slot (Class 1
GPRS)
#*7274# = Multi Slot (Class 4
GPRS)
#*7276# = Dunno
#*7337# = EEPROM Reset
(Unlock and Resets Wap Settings)
#*2787# = CRTP ON/OFF
#*3737# = L1 Dbg data
#*5133# = L1 Dbg data
#*7288# = GPRS Attached
#*7287# = GPRS Detached
#*7666# = SrCell Data
#*7693# = Sleep Act/DeAct
(Enable or Disable the Black
screen after doing nothing for a
while)
#*7284# = Class : B,C or GPRS
#*2256# = Calibration Info
#*2286# = Battery Data
#*2527# = GPRS Switching (set
to: class 4, class 8, class 9 or class
10)
#*2679# = Copycat feature
(Activate or Deactivate)
#*3940# = External loop test
9600 bps
#*4263# = Handsfree mode
(Activate or Deactivate)
#*4700# = Half Rate (Activate or
Deactivate)
#*7352# = BVMC Reg value
#*8462# = Sleeptime
#*2558# = Time ON
#*3370# = EFR (Activate or
Deactivate)
#*3941# = External looptest
115200 bps
#*5176# = L1 Sleep
#*7462# = SIM phase
#*7983# = Voltage/Frequenci
(Activate or Deactivate)
#*7986# = Voltage (Activate or
Deactivate)
#*8466# = Old time
#*2255# = Call ???
#*5187# = L1C2G trace (Activate
or Deactivate)
#*5376# = ??? White for 15 secs
than restarts.
#*6837# = Official Software
Version
#*7524# = KCGPRS
#*7562# = LOCI GPRS
#*7638# = RLC allways open
ended TBF (Activate or
Deactivate)
#*7632# = Sleep mode Debug
#*7673# = Sleep mode RESET
#*2337# = Permanent
Registration Beep
#*2474# = ???
#*2834# = Audio Path
#*3270# = DCS support (Activate
or Deactivate)
#*3282# = Data (Activate or
Deactivate)
#*3476# = EGSM (Activate or
Deactivate)
#*3676# = Flash volume
formated
#*4760# = GSM (Activate or
Deactivate)
#*4864# = Dunno doesn't work
on newer versions
#*5171# = L1P1
#*5172# = L1P2
#*5173# = L1P3
#*7326# = Accessory (I got
Vibrator)
#*7683# = Sleep variable (
#*7762# = SMS Brearer CS
(Activate or Deactivate)
#*8465# = Time in L1
#*9795# = wtls key
#*2252# = Current CAL
#*2836# = AVDDSS Management
(Activate or Deactivate)
#*3877# = Dump of SPY trace
#*7728# = RSAV done#
(Everything went to standart but
nothing was deleted)
#*2677# = ARM State (None or
Full Rate)
*#8999*636# = Have no clue
what it is, i see 20 lines
*#9999# = Software version
*#8999*8376263# = HW ver, SW
ver and Build Date
*#8888# = HW version
*#8377466# = Same HW/SW
version thing
*#7465625# = Check the locks
*7465625*638*Code# = Enables
Network lock
#7465625*638*Code# = Disables
Network lock
*7465625*782*Code# = Enables
Subset lock
#7465625*782*Code# = Disables
Subset lock
*7465625*77*Code# = Enables
SP lock
#7465625*77*Code# = Disables
SP lock
*7465625*27*Code# = Enables
CP lock
#7465625*27*Code# = Disables
CP lock
*7465625*746*Code# = Enables
SIM lock
#7465625*746*Code# = Disables
SIM lock
*7465625*228# = Activa lock ON
#7465625*228# = Activa lock
OFF
*7465625*28638# = Auto
Network lock ON
#7465625*28638# = Auto
Network lock OFF
*7465625*28782# = Auto subset
lock ON
#7465625*28782# = Auto
subset lock OFF
*7465625*2877# = Auto SP lock
ON
#7465625*2877# = Auto SP lock
OFF
*7465625*2827# = Auto CP lock
ON
#7465625*2827# = Auto CP lock
OFF
*7465625*28746# = Auto SIM
lock ON
#7465625*28746# = Auto SIM
lock OFF
*2767*3855# = E2P Full Reset
*2767*2878# = E2P Custom
Reset
*2767*927# = E2P Wap Reset
*2767*226372# = E2P Camera
Reset
#*6420# = MIC Off
#*6421# = MIC On
#*6422# = MIC Data
#*6428# = MIC Measurement
#*3230# = Trace enable and DCD
disable
#*3231# = Trace disable and DCD
enable
#*3232# = Current Mode
#7263867# = RAM Dump (On or
Off)
*2767*49927# = Germany WAP
Settings
*2767*44927# = UK WAP
Settings
*2767*31927# = Netherlands
WAP Settings
*2767*420927# = Czech WAP
Settings
*2767*43927# = Austria WAP
Settings
*2767*39927# = Italy WAP
Settings
*2767*33927# = France WAP
Settings
*2767*351927# = Portugal WAP
Settings
*2767*34927# = Spain WAP
Settings
*2767*46927# = Sweden WAP
Settings
*2767*380927# = Ukraine WAP
Settings
*2767*7927# = Russia WAP
Settings
*2767*30927# = GREECE WAP
Settings
*2767*73738927# = WAP
Settings Reset
*2767*49667# = Germany MMS
Settings
*2767*44667# = UK MMS
Settings
*2767*31667# = Netherlands
MMS Settings
*2767*420667# = Czech MMS
Settings
*2767*43667# = Austria MMS
Settings
*2767*39667# = Italy MMS
Settings
*2767*33667# = France MMS
Settings
*2767*351667# = Portugal MMS
Settings
*2767*34667# = Spain MMS
Settings
*2767*46667# = Sweden MMS
Settings
*2767*380667# = Ukraine MMS
Settings
*2767*7667#. = Russia MMS
Settings
*2767*30667# = GREECE MMS
Settings
*335# = Delete all MMS Messages
*663867# = Dump Mm file
#*536961# = WAPSAR enable /
HTTP disable
#*536962# = WAPSAR disable /
HTTP enable
#*536963# = Serial eable /
Others disable
#*53696# = Java Download
Mode
#*5663351# = Wap Model ID
[Your Model]
#*5663352# = Wap Model ID
[SEC-SGH???X/1.0]
#*566335# = Wap Model ID [SEC-
SGH???X/1.0]
*2767*66335# = Check on which
model it is
*2767*7100# = SEC-SGHS100/1.0
*2767*8200# = SEC-SGHV200/1.0
*2767*7300# = SEC-SGHS300/1.0
*2767*7650# = Nokia7650/1.0
*2767*2877368# = Reset WAP
Model ID to standart
Service codes Samsung:
E900 software version:
*#5002*8376263#
E900 full reset: *2767*3855#
Service codes Spice:
S404 enable COM port:
*#42253646633# -> Device ->
Set UART -> PS -> UART1/115200
S410 engineer mode:
*#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#
Service codes Philips:
S200 enable COM port:
*#3338913# -> Device -> Set
UART -> PS -> UART1/115200
Service codes "Chinese" models:
default user code: 1122, 3344,
1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# ->
Device -> Set UART -> PS Config ->
UART1/115200
Restore factory settings:
*#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
software version:
*01763*79837#
service menu: *01763*476#
reset defaults (phone/user code
reset to default):
*01763*737381#
Service codes VK-Mobile ??x, 5xx:
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold
#)
Service codes VK200, VK2000,
VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336#
(hold #)
reset defaults (phone/user code
reset to default): *#9998*7328#
(hold #)
Service codes LG:
software version: 2945#*#
KG300 NVRAM format: 2945#*# -
> menu 15
Service codes Sony-Ericsson:
J100 software version: #82#
Service codes Fly:
M100 software version:
####0000#
2040(i) reset defaults:
*#987*99# Send
MX200 reset defaults:
*#987*99# Send
MX200 software version: *#900#
Send
SL300m reset defaults:
*#987*99# Send
SL300m software version:
*#900# Send
SL500m reset defaults:
*#987*99# Send
SL500m software version:
*#900# Send
MP500 reset defaults:
*#987*99# Send
MP500 software version: *#900#
Send
Set language to English:
*#0044#
Set language to Russian:
*#0007#
Service codes Konka:
C926 software version: *320#
Send
C926 set default language:
*#0000# Send
C926 set English language:
*#0044# Send
Service codes GStar:
GM208 (Chinese Nokea 6230+)
engineering menu: *#66*#
Set language to English:
*#0044#
Set language to Russian:
*#0007#
Service codes Motofone-F3:
Motofone F3 software version:
**9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON |
OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto
keypad lock ON | OFF
***510* / ***511* Voice
Prompts ON | OFF
***160* / ***161* Restricted
Calling (Phonebook only) ON | OFF
***200608* Send: software
version
***200606* Send: software
version
***200806* Send: flex version
***250* / ***251* Keypad
tones ON | OFF
***470* Select time format
***500* /***501* Prepaid
Balance Display ON | OFF
***520* Change language
All China Format Code
-------------------------------------------
-------------------------------------
*#66*# Set Factory Mode
CONFIRMED
*#8375# Show Software Version
CONFIRMED
*#1234# A2DP ACP Mode
CONFIRMED
*#1234# A2DP INT Mode
CONFIRMED
*#0000# + Send : Set Default
Language CONFIRMED
*#0007# + Send : Set Language
to Russian CONFIRMED
*#0033# + Send : Set Language
to French CONFIRMED
*#0034# + Send : Set Language
to Spanish CONFIRMED
*#0039# + Send : Set Language
to Italian CONFIRMED
*#0044# + Send : Set Language
to English CONFIRMED
*#0049# + Send : Set Language
to German CONFIRMED
*#0066# + Send : Set Language
to Thai CONFIRMED
*#0084# + Send : Set Language
to Vietnamese CONFIRMED
*#0966# + Send : Set Language
to Arabic CONFIRMED
More some codes for reset mobile
china
*#77218114#
*#881188#
*#94267357#
*#9426*357#
*#19912006#
*#118811#
*#3646633#
CHINESE MODELS:
default user code: 1122, 3344,
1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# ->
Device -> Set UART -> PS Config ->
UART1/115200
Restore factory settings:
*#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default language: *#0000#
Send
set English language: *#0044#
Send
set English language (new
firmware): *#001# Send
for n95 that trips off on making
call use
*#3646633#
ALCATEL
MASTERCODES:
Alcatel HD1, HE1: 25228353
Alcatel BE1, BE3: 25228352
Alcatel BE4, BE5: 83227423
*#06# Show IMEI & SW version
000000* Entering in Engineering
Menu1 (with SIM)
###874# Reset to Factory
Defaults (with SIM)
###765*02# Add Barring Groups
###765*05# Locking to
Network
###765*07# Unlocking from
Network
###765*08# Erase Network
###765*78# Deactivate Barring
Groups
0123456789 Menu2 Code - BE4
Menu2 - turn long CALL in Maenu1
*#0048# Fast change language
(Polish)
*#0049# Fast change language
(Deutsch)
Service codes Alcatel:
C820, C825, C700, C701, C707,
C717, Elle-N3 set language to
English: *#0044#
C820, C825, C700, C701, C707,
C717, Elle-N3 set language to
Russian: *#0007#
C820, C825, C700, C701, C707,
C717, Elle-N3 set language to
French: *#0033#
E101, E207 software version:
*#4837*#
E101, E207 auto call test:
*#2255*#
E101, E207 memory status:
*#6362*#
E101, E207 reset menu:
*#7378*#
S520 factory mode: *#3228#
S520 engineer mode: *#364463#
S520 software version: *#837#
S520 auto test: *#2886#
S520 clean test records:
*#3872#
S520 restore default settings:
*#73738#
S520 something unknown:
*#200709*01#
BOSCH
*#06# IMEI (INTERNATIONAL
MOBILE EQUIPMENT IDENTITY)
*#0000# Language automaticaly
(reset to english)
*#3370# Enhaced Full Rate
*#3370# Reset the phone
*#9000# enter sim lock code
*#9001# enter the corporate
code (Bosch 908)
*#9002# enter the provider code
(Bosch 908)
*#9003# enter the network
code
*#9004# enter the subset code
*#9100# remove the sim lock
permanently
*#9101# remove the corporate
lock permanently
*#9102# remove the provider
lock permanently

PHILIPS
*#06# IMEI
*#2254*# Status register:
C,BS,RR,MMI,CREAT
*#2255*# activate and
deactivate the "DEBUG CALL" -
Mode;
when activated,make a call to
busy line an the phone will
display
some hex codes on the display
*#2558*# the time in days,
hours and minutes you are
connected to the net
*#2562*# not clear; the phone
reconnect to the net
*#2565*# not clear; warmstart ?
*#3333*# (NO) blocking -list (15
items)
*#2377*# "BEER" : not cler the
phone waits a random time and
reconnect to net,
sometimes make reset
*#3377*# Init , Flags , SIM LOCK
*#3353*# reset the (NO)
BLOCKING list
*#7378*# Name, Lenght,SIM
phase
*#7489*# Security Code
*#7693*# you can activate and
deactivate the Sleep Menu
(when deactivated the battery
will go down!)
*#7787*# not clear: Spurious
Interrupt
*#7948*# Switch Off: not clear:
it is a timer or something
*#8463*# Some information
about the SLEEP MODE:
Wake, Sleep Req., Sleep
GENIE (TCD838)
*#2337*# and it will be activate
the beep signal
when the phone reconnected to
the net.
FIZZ
*#8377*# software version
*#1234# or *#7489# Security
code
*#5644*# software version
(enlarge)
*#8377*# simlock status
OZEO
*#5187*# L1TR
*#3877*# hanging mobile for a
while
*#7826*# master reset
*#7626*# ?
*#7462*# to SIM PHASE 2
*#7676*# ?
SAGEM
*#06# IMEI
in main menu press * for HOT
MENU:
lcd, led, vibra, tests, imei,
software versions, battery
voltage
Type MENU - 5 - 1 - 1 - # to enter
Engineering Menu
SAMSUNG
*#06# Show IMEI
*#9999# Show Software Version
*#0837# Show Software Version
(instructions)
*#0001# Show Serial Parameters
*#9125# Activates the smiley
when charging
*#0523# LCD Contrast
*#9998*228# Battery status
(capacity, voltage, temperature)
*#9998*246# Program status
*#9998*289# Change Alarm
Buzzer Frequency
*#9998*324# Debug Screens
*#9998*364# Watchdog
*#9998*377# EEPROM Error
Stack - Use side keys to select
values
*#9998*427# Trace Watchdog
*#9998*523# Change LCD
contrast
*#9998*544# Jig detect
*#9998*636# Memory status
*#9998*746# SIM File Size
*#9998*778# SIM Service Table
*#9998*785# RTK (Run Time
Kernel) errors - if ok then phn is
reset,
info is put in memory error
*#9998*786# Run, Last UP, Last
DOWN
*#9998*837# Software Version
*#9998*842# Test Vibrator -
Flash the screenlight during 10
sec
and vibration activated
*#9998*862# Vocoder Reg -
Normal, Earphone or Carkit
*#9998*872# Diag
*#9998*947# Reset On Fatal
Error
*#9998*999# Last/Chk
*#9998*9266# Yann debug
screen (Debug Screens?)
*#9998*9999# Software version
*0001*s*f*t# Changes serial
parameters (s=?, f=0.1, t=0.1)
*0002*?# unknown
*0003*?# unknown
FOR NEW SGH (R210, T100, A300...)
if code is in format
*#9998*xxx#
try write in this *#0xxx#
SGH-600
SGH-2100
*2767*3855# Full EEPROM Reset
(THIS CODE REMMOVES SP-LOCK!
but also changes IMEI to
447967-89-400044-0
*2767*2878# Custom EEPROM
Reset
SGH E700
*2767*688# remove USER CODE
and SIMLOCK
SGH V200
Unlocking:
Power on the phone without SIM
card and type these codes:
*2767*63342# and press green
button
*2767*3855# and press green
button
*2767*2878# and press green
button
*2767*927# and press green
button
*2767*7822573738# press
button
Phone will be unlocked, but all
trims are reseted !!!
Mobile phone must be fully
charged
SGH S500
Unlocking
*2767*MVT# (*2767*688#) E2P
MVT Reset
*#SIMLOCK# (*#7465625#)

Android users Happy

ANDROID secret codes
DISCLAIMER: This information is
intended for experienced users. It
is
not intended for basic users,
hackers, or mobile thieves. Please
do not try any of following
methods
if you are not familiar with mobile
phones. We'll not be responsible
for
the use or misuse of this
information, including loss of data
or hardware damage. So use it at
your own risk.
Code:-
*#*#4636#*#*
This code can be used to get
some
interesting information about
your
phone and battery. It shows
following 4 menus on screen:
* Phone information
* Battery information
* Battery history
* Usage statistics
Code :-
*#*#7780#*#*
This code can be used for a
factory
data reset. It'll remove following
things:
* Google account settings stored
in
your phone
* System and application data
and
settings
* Downloaded applications
It'll NOT remove:
* Current system software and
bundled applications
* SD card files e.g. photos, music
files, etc.
PS: Once you give this code, you
get a prompt screen asking you
to
click on "Reset phone" button. So
you get a chance to cancel your
operation.
code:-
*2767*3855#
Think before you give this code.
This code is used for factory
format.
It'll remove all files and settings
including the internal memory
storage. It'll also reinstall the
phone
firmware.
PS: Once you give this code, there
is
no way to cancel the operation
unless you remove the battery
from
the phone. So think twice before
giving this code.
code:-
*#*#34971539#*#*
This code is used to get
information
about phone camera. It shows
following 4 menus:
* Update camera firmware in
image
(Don't try this option)
* Update camera firmware in SD
card
* Get camera firmware version
* Get firmware update count
WARNING: Never use the first
option otherwise your phone
camera will stop working and
you'll
need to take your phone to
service
center to reinstall camera
firmware.
code:-
*#*#7594#*#*
This one is favorite one. This
code
can be used to change the "End
Call / Power" button action in
your
phone. Be default, if you long
press
the button, it shows a screen
asking
you to select any option from
Silent
mode, Airplane mode and Power
off.
You can change this action using
this code. You can enable direct
power off on this button so you
don't need to waste your time in
selecting the option.
code:-
*#*#273283*255*663282*#*#
*
This code opens a File copy
screen
where you can backup your media
files e.g. Images, Sound, Video
and
Voice memo.
code:-
*#*#197328640#*#*
This code can be used to enter
into
Service mode. You can run various
tests and change settings in the
service mode.
WLAN, GPS and Bluetooth Test
Codes:
*#*#232339#*#* OR
*#*#526#*#*
OR *#*#528#*#* - WLAN test
(Use
"Menu" button to start various
tests)
*#*#232338#*#* - Shows WiFi
MAC address
*#*#1472365#*#* - GPS test
*#*#1575#*#* - Another GPS
test
*#*#232331#*#* - Bluetooth
test
*#*#232337#*# - Shows
Bluetooth
device address
*#*#8255#*#*
This code can be used to launch
GTalk Service Monitor.
Codes to get Firmware version
information:
*#*#4986*2650468#*#* - PDA,
Phone, H/W, RFCallDate
*#*#1234#*#* - PDA and
Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW
Version
*#*#44336#*#* - PDA, Phone,
CSC, Build Time, Changelist
number
Codes to launch various Factory
Tests:
*#*#0283#*#* - Packet
Loopback
*#*#0*#*#* - LCD test
*#*#0673#*#* OR
*#*#0289#*#*
- Melody test
*#*#0842#*#* - Device test
(Vibration test and BackLight
test)
*#*#2663#*#* - Touch screen
version
*#*#2664#*#* - Touch screen
test
*#*#0588#*#* - Proximity
sensor
test
*#*#3264#*#* - RAM version

Gimme feedback if it works Sad